For signal conditioning of strain gauge sensors
The measuring Amplifier is particularly suitable for the following applications:
- Weight measurement
- Determination of mechanical loads in structures
- Limit value monitoring and monitoring of mechanical loads to avoid critical conditions in plants and structures
The connection to a sensor and to the control is made via two cable bushings and via terminals.
Properties:
- Cost-effective design for static applications
- Wide input range from 1.0 mV/V to 4.0 mV/V for universal connection of strain, force and weight sensors with strain gauge full bridge
- Variable setting of measurement gain
Downloads
Installation and use
The measuring Amplifiers from X-Sensors are suitable for universal signal conditioning of Force and Strain Sensors with strain gauge full bridges. Due to the simple “onboard” adjustment of zero point and sensitivity, the measuring Amplifiers are optimally designed for use in static measurements, such as those found in the monitoring of structures or plants.
The connection to a Sensor and to the control is made via two cable bushings and via terminals.
Electrical connection
The measuring Amplifiers are available with voltage output (0-10 V) and current output (4-20 mA), which amplify strain gauge full bridges accordingly.
Technical specifications
Details
| measuring range | 0…1.0 mV/V, 0…1.25 mV/V, 0…1.5 mV/V, 0…2.0 mV/V, 0…3.0 mV/V, 0…4.0 mV/V |
|---|---|
| design | |
| Anwendung / Tarierung | Onboard potentiometer for zero point adjustment, Static Applications |
| Ausgangssignal | |
| Feature | |
| (K) Input sensitivity (in mV/V) | 1.0, 1.25, 1.5, 2.0, 3.0, 4.0 |
| (K) Application | static |
| (K) Output signal | ± 10 V, 0-10 V, 0-5 V, 4-20 mA |
| (K) Housing | inline housing |
| (K) Electrical connection | clamps |
Contact us!
We are happy to answer your questions about our sensors and find a solution for your application.
X-SENSORS AG
If you have any questions about our products, we are at your disposal.
Mit Erfahrung und Freude an Innovationen
