Pressure Force Sensor XCH-171
particularly suitable for machinery and plant construction
For accurate measurements of compressive forces
The Pressure Force Sensors of the XCH-171 series come with an inner diameter.
This varies depending on the version. The compressive Force Sensors measure precisely in the force range of 6.0 – 100 kN.
The Sensors are unit-sensitive, i.e. they are always delivered with a calibrated output signal. Due to this unit sensitivity, a meaningful signal is already available after installation. No additional calibration is necessary beforehand.
Properties
- Through hole for easy measurement of compressive forces
- Inner diameters correspond to common thread sizes (M10 / M20 / M30)
- High overload characteristics
- Specific measuring ranges available
Downloads
Installation and deployment
Electrical connection
The Force Sensors from X-Sensors are based on a strain gauge full bridge with strain gauges. The output signal for this Sensor is specified in mV/V. Various input modules of controllers already allow the direct connection of Force Sensors with strain gauge full bridge.
In addition, measuring Amplifiers with voltage output (0-10 V) and current output (4-20 mA) are available, which amplify the strain gauge full bridges accordingly. The measuring Amplifiers are available in a robust field housing, for DIN rail mounting or in an inline housing.
Mechanical connection / construction
The advantages of the compression Force Sensors are the simple handling. The force acting centrically from above is measured.
The various Force Sensors are versatile and are used in the areas of material testing machines, hardness testers, measurement of compressive forces, press-in force control and as Load Cells.
The mounting of the strain gauge Force Sensors is uncomplicated, either via the thread, the inner diameter or via the prefabricated holes, depending on the model.
Technical specifications
Details
| measuring range | |
|---|---|
| direction of force | |
| Design / force application | |
| Feature | |
| (K) Mounting position | Measurement in the power flow |
| (K) Measuring range (in kN) | 30, 6 |
| (K) Electrical connection | USB-plug |
| (K) Cable length | 1.0 |
| (K) Output signal | 1.0 mV/V, 1.5 mV/V |
| (K) Design | through hole |
Contact us!
We are happy to answer your questions about our sensors and find a solution for your application.
X-SENSORS AG
If you have any questions about our products, we are at your disposal.
Mit Erfahrung und Freude an Innovationen
