Strain Transducer X-103-S10
especially suitable for applications with full-bridge signal mV/V
For accurate measurements of strain
Strain gauge Sensors without an integrated measuring Amplifier are particularly suitable for applications where the full bridge signal mV/V is required or where several Sensors have to be connected to one measuring amplifier. This can be the case, for example, when measuring the weight of silos and monitoring several tie bars on presses. The solid steel housing and the tight design (IP64) guarantee problem-free operation, even under difficult environmental conditions.
The Strain Transducers are ideally suited for use in the following areas:
- Measurement, monitoring and control of forces in forming technology
- Weight measurement on beams or supports
- Measurement of smallest strains on rigid structures for analysis of mechanical loads
X-Sensors’ Strain Transducers reliably measure even small strains on the surface of flat structures. Despite the simple screw-on mounting, the measured values are comparable to glued-on strain gauges, while avoiding their disadvantages.
Properties
- Reliable measurement of smallest strains for indirect force measurement
- With M12 connector
- For cyclic and static force measurements with subsequent measuring amplifier
- Extremely flat design of only 6.5 mm height
- Simple and space-saving mounting directly on the construction surface
Downloads
Data sheet – Strain sensor with DMS output signal / without amplifier STEP-Datei X-103-S10 (M12)Measurement principle
How it works
The Surface Strain sensor X-103-S10 detects the strain between the two screw-on surfaces and amplifies it mechanically. This concentrates the strain on the measuring point, where it is converted into an electrical signal by means of a resistive measuring bridge.
Strain Transducers are very compact in dimensions and easy to install, regardless of the nominal forces. Since the Sensors are installed on the machine component outside the working space, they are an elegant alternative to conventional Force Sensors even when space is limited.
Technical specifications
Details
| measuring range | |
|---|---|
| Bauform / Montage | |
| Anwendung / Tarierung | Cyclic Applications, Static Applications, Without integrated amplifier |
| Ausgangssignal | |
| Electrical connection | 1 m cable with open strands, 3 m cable with open strands, 6 m cable with open strands |
| (K) Input sensitivity (in mV/V) | 1.0 |
| (K) Electrical connection | M12 – 4pol. plug, M12 – 5pol. Plug |
| (K) Output signal | 1.0 mV/V |
| (K) Messbereich (in µm/m) | |
| (K) Application | dynamic |
| (K) Mounting position | Closing force and mold protection, Measurement on the frame/bracket |
Contact us!
We are happy to answer your questions about our sensors and find a solution for your application.
X-SENSORS AG
If you have any questions about our products, we are at your disposal.
Mit Erfahrung und Freude an Innovationen
