Tension and Compression Force Sensor X-136
especially suitable for static and dynamic force monitoring
For accurate measurements of tensile and compressive force
The Tension and Compression Force Sensor X-136 is an all-rounder and comes in two different versions.
For the measuring principle of the Inline Force Sensors, diaphragm measuring bodies are used on which the strain gauges are applied. The strain gauge Force Sensor is integrated directly into the force flow and the force is introduced centrally and axially via the two threaded bolts. The Load Cell offers uncomplicated load introduction via the opposite threaded connections.
The Load Cell is suitable as a tensile Force Sensor, as well as a compressive Force Sensor in static and dynamic applications. The Force Sensor measures precisely and quickly in the force range from 0.5 kN to 20 kN and offers excellent long-term stability. The diameter of the Load Cell is 51 mm. The first version offers two M12 male threads. The second version comes with an M12 threaded rod and an M12 internal thread.
Properties
- Force transmission customisable for OEM applications
- Low overall height for space-saving installation
- With M12 internal thread or M12 external thread for force transmission
- Available for tensile and compressive forces from 0.5 kN to 20 kN
Compare this Product
Data sheet X-136
STEP-File X-136 (Male thread M12 / Female thread M12)
STEP-File X-136 (Male thread M12 / Male thread M12)
Downloads
Data sheet X-136 STEP-File X-136 (Male thread M12 / Female thread M12) STEP-File X-136 (Male thread M12 / Male thread M12)Installation and deployment
Electrical connection
The Force Sensors from X-Sensors are based on a strain gauge full bridge with strain gauges. The output signal for this Sensor is specified in mV/V. Various input modules of controllers already allow the direct connection of Force Sensors with strain gauge full bridge.
In addition, measuring Amplifiers with voltage output (0-10 V) and current output (4-20 mA) are available, which amplify the strain gauge full bridges accordingly. The measuring Amplifiers are available in a robust field housing, for DIN rail mounting or in an inline housing.
Mechanical connection / construction
Due to their compact design, our tension and compression Force Sensors are suitable for mounting in very limited spaces. The force is applied via the respective internal and external threads, via which the tensile and compressive force is centrally absorbed. Due to the solid, weatherproof stainless steel housing, according to IP 65, the tension and compression Force Sensors are very reliable and robust. This guarantees problem-free operation even under stressful environmental conditions.
These properties make the Load Cells ideally suited for a wide range of applications where high accuracy is required, such as force monitoring in pressing and joining processes, apparatus engineering, toolmaking, special machine construction and industrial production automation.
Technical specifications
Details
| measuring range | |
|---|---|
| direction of force | |
| Design / force application | |
| Feature | |
| (K) Measuring range (in kN) | 0.5, 1, 10, 2, 20, 3, 5 |
| (K) Input sensitivity (in mV/V) | 1.5, 2.0 |
| (K) Application | dynamic |
| (K) Design | external thread, inner thread |
| (K) Output signal | 1.5 mV/V, 2.0 mV/V |
| (K) Cable length | 10.0, 3.0 |
| (K) Electrical connection | M12 – 4pol. plug, open strands |
| (K) Mounting position | Measurement in the power flow |
Contact us!
We are happy to answer your questions about our sensors and find a solution for your application.
X-SENSORS AG
If you have any questions about our products, we are at your disposal.
Mit Erfahrung und Freude an Innovationen
